The Radeon HD 5970: Completing AMD's Takeover of the High End GPU Market
by Ryan Smith on November 18, 2009 12:00 AM EST- Posted in
- GPUs
40nm Supply Redux
If you have seen our Radeon 5800 supply article, then you know that AMD is currently trying to come to terms with a significant shortage of Cypress dice. Since the 5800 series launched in September, TSMC’s yields have taken a hit as the company ramps up 40nm production. And while this is resulting in more usable chips per week than when AMD started, it’s lower than it was supposed to be. Compounding matters is high demand for these cards thanks to their performance, features, and a lack of significant competition from NVIDIA at this time.
So when we were briefed about the 5970, we asked AMD point-blank whether it was a good idea to be launching another Cypress based card so soon, and at a time when they already don’t have enough chips to go around. Their answer was equally straightforward: why not?
The design is done and AMD is already capable of building the 5970. For AMD, there is no benefit in waiting; no matter what they do, anything with a Cypress chip in it today is going to sell out. Holding back may be slightly more egalitarian, but as the 5970 is a luxury part, it’s not a high-volume part anyhow, so its introduction isn’t going to significantly disrupt 5800 shipments even if it does use 2 GPUs per card. Ultimately I don’t think we would even be having this discussion unless the profit margin on the 5970 is higher than the 5870, so at some point this comes down to AMD doing what is most profitable for them.
At $600, AMD isn’t going to sell a ton of 5970s, and the launch numbers reflect this. While the 5800 series cards launched with tens-of-thousands of cards, the 5970 launch will simply be with thousands of cards. Even as a low-volume part, we’re expecting the 5970 to sell out just as fast as any 5800 card did. But depending on what AMD does with future chip shipments though and what TSMC’s yields do, this may be the first product line where demand finally gets met in the near future.
We also had a chance to talk to AMD about the overall 40nm supply situation. AMD of course isn’t very pleased with the situation, but this is something they’ve apparently planned for, after their first 40nm test chips came back as being less impressive than their 55nm and 65nm test chips were. Besides TSMC’s subpar yields, AMD is unable to get as many wafer starts as they’d like, which is compounding the issue.
Finally, we’re told that the TSMC situation is continuing to improve, and that AMD currently expects the Cypress chip supply to pick up in December. To what level of production “pick up” goes with we’re not sure, but it’s likely less than demand. In talking to AMD, they didn’t seem confident in being able to keep any Cypress-based products in stock through Christmas. Supplies will improve through the end of the year, but it sounds like it’s going to be 2010 before supply and demand finally balance out.
Facebook
Twitter
RSS
114 Comments
View All Comments
tcube - Monday, March 1, 2010 - link
Well my thought is that if amd would release this card on SOI/HK-MG in 32/28nm MCM config at 4 GHz it would leave nvidia wondering what it did to deserve it. And I wonder ... why the heck not? These cards would be business-grade-able and with a decent silicon they could ask for enormous prices. Plus they could probably stick the entire thing in dual config on one single card (possibly within the 300 W pcie v2 limit)... that would be a 40-50 Tflops card and with the new GDDR5(5ghz +) it should qualify as a damn monster. I would also expect a ~2-3k$ per such beast but I think its worth it. 50Tf/card, 6cards/server... 3Pflop/cabinet... hrm... well...it wouldn't be fair to compair it to general purpose supercomputers... buuut you could deffinatelly ray trace render avatar directly into HD4x 3d in realtime and probably make it look even better in the process...srikar115 - Sunday, December 6, 2009 - link
i agree with this reveiw ,here a complete summary i found is also intrestinghttp://pcgamersera.com/2009/12/ati-radeon-5970-rev...">http://pcgamersera.com/2009/12/ati-radeon-5970-rev...
srikar115 - Tuesday, April 20, 2010 - link
http://pcgamersera.com/ati-radeon-5970-review-suma...xpclient - Friday, November 27, 2009 - link
What no test to check video performance/DXVA? DirectX 11/WDDM 1.1 introduced DXVA HD (Accelerated HD/Blu-Ray playback).cmdrdredd - Sunday, November 22, 2009 - link
Clearly nobody buying this card is going to put Crysis on "Gamer Quality" They'll put it on the max it can go. Why is AT still the only tech site in the whole world who is using "Gamer quality" with a card that has enough power to run a small town?AnnonymousCoward - Sunday, November 22, 2009 - link
Why does the 5970 get <= 5850 CF performance, when it has 3200 Stream Processors vs 2880?araczynski - Saturday, November 21, 2009 - link
i look forward to buying this, in a few years.JonnyDough - Friday, November 20, 2009 - link
why they didn't just call it the 5880.Paladin1211 - Friday, November 20, 2009 - link
Ryan,I'm a professional L4D player, and I know the Source engine gives out very high frame rate on today cards. The test become silly because there is no different at all from 60 to 300+ fps. So, it all comes down to min fps.
I suggest that you record a demo in map 5 Dead Air, with 4 Survivors defend with their back onto the limit line of the position of the first crashed plane. The main player for the record will be vomitted on by boomer, another throws pipe bomb near him, another throws molotov near him also. Full force of zombies (only 30), 2 hunters, 1 smoker, 1 tank attacking. (When a player become a tank, the boss he's controlling become a bot, and still attacking the survivors).
This is the heaviest practical scene in L4D, and it just makes sense for the benchmark. You dont really need 8 players to arrange the scene, I think using cheats is much easier.
I know it will take time to re-benchmark all of those cards for the new scene, but I think it wont be too much. Even if you cant do this, please reply me.
Thank you :)
SunSamurai - Friday, November 20, 2009 - link
You're not professional FPS player if you think there is no difference between 60 and 300fps.