Test Setup
We have two "similar" systems that we used to test AC, one using ATI graphics and one using NVIDIA graphics. It's important to note that these are not identical systems, as the hardware we had on hand is limited. Specifically, SLI support requires an NVIDIA chipset and CrossFire support requires an Intel or AMD chipset. Our NVIDIA testbed comes courtesy of Dell, their midrange XPS 630 that uses the nForce 650i chipset. Our ATI testbed is the same X38 platform we have used in previous gaming articles. It includes more memory (which doesn't affect performance) rated at DDR2-800 and Windows Vista 64-bit. Thus, it is worth noting that we are not comparing apples-to-apples... or at best, we're comparing Granny Smiths with Fuji apples.
| Custom X38 Test System | |
| Processor | Core 2 Quad Q6600 (2.40GHz 2x4MB
cache) Overclocked to 3.00GHz (QX6850) Overclocked to 3.42GHz (1520FSB) |
| Motherboard | Gigabyte GA-X38-DQ6 |
| Memory | 2x2048MB OCZ DDR2-800 Running at DDR2-800 4-4-4-12 |
| Graphics | 2 x AMD Radeon HD 3870 (CrossFire) |
| Hard Drive | Samsung F1 750GB (7200RPM 32MB) |
| Operating System | Windows Vista Ultimate 64-bit |
| . | |
| Dell XPS 630 Test System | |
| Processor | Core 2 Quad Q6600 (2.40GHz 2x4MB
cache) Overclocked to 3.00GHz (QX6850) |
| Motherboard | Dell nForce 650i |
| Memory | 2x1024MB DDR2-667 Running at DDR2-667 5-5-5-15 |
| Graphics | 2 x GeForce 8800 GT 512MB (SLI) |
| Hard Drive | Seagate Barracude 7200.10 500GB (7200RPM 16MB) |
| Operating System | Windows Vista Home Premium 32-bit |
| . | |
In the processor department, the two systems are identical, sporting Intel's Q6600 revision G0 quad-core processor. Both systems also support overclocking, and we will investigate how that affects performance. The Dell system could only run reliably at around 3.0GHz, so we chose that frequency as a comparison point, simulating a QX6850 CPU (9x333MHz on a 1333FSB). Finally, we tested in both single and dual-GPU configurations on both systems. We're not using this to come to a strict conclusion on whether ATI or NVIDIA graphics are better for running AC, but rather to get a general idea of what sort of hardware is required to run the game well.
Before we get to the actual benchmark results, we want to define some of the settings we'll be using. For benchmarking purposes, we tested at Medium, High, and 4xAA. Note that we also left Level of Detail at maximum for the benchmarks, and the crowd density was likewise set to maximum. Medium drops the Shadows and Graphic Detail settings down one notch. Additional testing of lower detail settings can be found further in the article.
Note: if you're not interested in performance testing, you may want to skip to the conclusion.
Facebook
Twitter
RSS
32 Comments
View All Comments
Zak - Tuesday, June 3, 2008 - link
I'm usually against AnandTech straying away from their core hardware reviews they've become famous for in the first place, but this is the best, most thorough, in-depth game review I have ever read! Very well done, most enjoyable reading. Thanks:)Zak
mustardman - Tuesday, June 3, 2008 - link
I'm curious why Anandtech recommended Vista without comparing the performance of Windows XP. They didn't even have a test box running XP or did I miss it.From my experience and experience from friends, Vista is still behind XP in gaming performance. In some cases, far behind.
Am I missing something?
JarredWalton - Tuesday, June 3, 2008 - link
With modern DX10 GPUs, Vista is required to even get DX10 support. Having looked at DX9 Assassin's Creed, I can't say the difference is all that striking, but the DX10 mode did seem to run faster. (I could test if there's desire, but it will have to wait as I'm traveling this week and don't have access to the test systems used in this article.)Personally, while Vista had some issues out of the gate, drivers and performance are now much better. XP may still be faster in some situations, but if you're running a DX10 GPU I can't see any reason to stick with XP. In fact, there are plenty of aspects of Vista that I actually prefer in general use.
Since this was primarily a game review, and I already spent 3x as much time benchmarking as I actually did beating the game, I just wanted to get it wrapped up. Adding in DX9 Vista vs. DX9 XP would have required another 20-30 hours of benchmarking, and I didn't think the "payoff" was worthwhile.
Justin Case - Monday, June 2, 2008 - link
[quote]Unlike Oblivion, however, all of the activity you see is merely a façade. The reality is that all the people are in scripted loops, endlessly repeating their activities.[/quote]...which is exactly what Oblivion NPCs do (compounded by the fact that they all have the same handful of voices, that all voices use exactly the same sentences, and that some characters change voice completely depending on which scripted line they're repeating).
If anything, Oblivion's world feels even more artificial than Morrowind. One thing is the AI we were promised for Oblivion while the game was in development, another is what actually shipped. Most of the behaviors shown in the "preview videos" simply aren't in the game at all.
Even with the (many, and very good) 3rd party mods out there, Oblivion NPCs feel like robots.
JarredWalton - Tuesday, June 3, 2008 - link
Oblivion NPCs can actually leave town, they sleep at night, they wander around a much larger area.... Yes, they feel scripted, but compared to the AC NPCs they are geniuses. The people in AC walk in tight loops - like imagine someone walking a path of about 500-1000 feet endlessly, with no interruptions for food, bed, etc. I'm not saying Oblivion is the best game ever, but it comes a lot closer to making you feel like it's a "real" world than Assassin's Creed.But I still enjoyed the game overall.
erwendigo - Monday, June 2, 2008 - link
This is a very old new, the DX10.1 suppor of this game eliminate one render pass BUT with a cost, a inferior quality image.The render image isn´t equal to DX10 version, Ubisoft then dropped suport for DX10.1 in 1.02 patch.
A story very simple, nothing about conspiracy theory, or phantoms.
Anandtech guys, if you believe in these phantoms, then make a review with 1.01 patch (this is yet on this world, men, download and test the f***ing patch), otherwise, your credibility will disminish thanks to this conspiracy theory.
JarredWalton - Tuesday, June 3, 2008 - link
I tested with version 1.00 and 1.02 on NVIDIA and ATI hardware. I provided images of 1.00 and 1.02 on both sets of hardware. The differences in image quality that I see are at best extremely trivial, and yet 1.02 in 4xAA runs about 25% slower on ATI hardware than 1.00.What is version 1.01 supposed to show me exactly? They released 1.01, pulled it, and then released 1.02. Seems like they felt there were some problems with 1.01, so testing with it makes no sense.
erwendigo - Tuesday, June 3, 2008 - link
Well, you writed several pages about the suspicious reasons of the dropped support of DX10.1.If you sow the seeds of doubt, then you´ld have done a test for it.
The story of this dropped suport has a official version (graphical bugs), and in many forums users reported this with 1.01 patch (and DX10.1). Another version is the conspiracy theory, but this version hasn´t proof.
¿This is the truth? I don´t know, I can´t test this with my computer, but if you publish the conspiracy theory and test the performance and quality of 1.0 and 1.02 version, why don´t you do the same with 1.01 patch?
This is not about performance, this is to endorse your version of the story. With this, your words earn respect, without the test, your words are transformed into bad rumors.
JarredWalton - Tuesday, June 3, 2008 - link
I still don't get what you're after. Version 1.00 has DirectX 10.1 support; version 1.02 does not. Exactly what is version 1.01 supposed to add to that mix? Faulty DX10.1? Removed DX10.1 with graphical errors? I don't even know where to find it (if it exists), so please provide a link.The only official word from Ubisoft is that DX10.1 "removed a rendering pass, which is costly." That statement doesn't even make sense, however, as what they really should have said is DX10.1 allowed them to remove a rendering pass, which was beneficial. Now, if it was beneficial, why would they then get rid of this support!?
As an example of what you're saying, Vista SP1 brings together a bunch of updates in one package and offers better performance in several areas relative to the initial release of the OS. So imagine we test networking performance with the launch version of Vista, and then we test it with SP1 installed, and we conclude that indeed somewhere along the way network performance improved. Then you waltz in and suggest that our findings are meaningless because we didn't test Vista without SP1 but with all the other standard updates applied. What exactly would that show? That SP1 was a conglomerate of previous updates? We already know that.
So again, what exactly is version 1.01 supposed to show? Version 1.02 appears to correct the errors that were seen with version 1.00. Unless version 1.01 removed DX10.1 and offered equivalent performance to 1.00 or kept DX10.1 and offered equivalent performance to 1.02, there's no reason to test it.
Maybe the issue is the version numbers we're talking about. I'm calling version 1.0.0.1 of the game - what the DVD shipped with - version 1.00. The patched version of the game is 1.0.2.1, so I call that 1.02. Here's what the 1.02 patch officially corrects:
------------------
* Fixed a rare crash while riding the horse in Kingdom
* Fixed a corruption of Altair’s robe on certain graphics hardware
* Cursor is now centered when accessing the Map
* Fixed a few problems with Alt-Tab
* Fixed a graphical bug in the final fight
* Fixed a few graphical problems with dead bodies
* Fixed pixellation with post-FX enabled on certain graphics hardware
* Fixed a small bug in the DNA Menu that would cause the image to disappear if the arrow was clicked rapidly
* Fixed some graphical corruption in Present Room with low Level Of Detail
* Character input is now canceled if the controller is unplugged while moving
* Added support for x64 versions of Windows
* Fixed broken post-effects on DirectX 10.1 enabled cards
------------------
I've heard more about rendering errors on NVIDIA hardware with v1.00 than I have of ATI hardware having problems. I showed a (rare) rendering error in the images that happens with ATI and 4xAA, but all you have to do is lock onto a target or enter Eagle Vision to get rid of the error (and I never saw it come back until I restarted the game).
Bottom line is I have PROOF that v1.00 and v1.02 differ in performance, specifically in the area of anti-aliasing on ATI 3000 hardware. If a version 1.01 patch ever existed, it doesn't matter in this comparison. The conspiracy "theory" part is why Ubisoft removed DX10.1 support. If you're naive enough to think NVIDIA had nothing to do with that, I wish you best of luck in your life. That NVIDIA and Ubisoft didn't even respond to our email on the subject speaks volumes - if you can't say anything that won't make you look even worse, you just ignore the problem and go on your merry way.
erwendigo - Tuesday, June 3, 2008 - link
Well, you talk me about some links, then here have some of them:The first and foremost:
http://www.rage3d.com/articles/assassinscreed%2Dad...">http://www.rage3d.com/articles/assassinscreed%2Dad...
In this one Rage3D (a proATI website) analyzes the reason of the dropped support of DX10.1, with a comparation of images of the different rendering modes.
In this article Rage3D people found several graphical bugs of the dx10.1, they described them as minor bugs, BUT I don´t think that the lack of some effects in the DX10.1 are minor bugs.
The DX10.1 with activated AA lacks of dust effect, and the HDR rendering is different from the DX10 version.
In Rage3D thinks that this show a DX10 bug in HDR rendering, because they said that Ubisoft declared that HDR rendering in DX9 and DX10 paths are identical, and they tested that DX10 and DX9 HDR rendering are different. This point could be true, but it´s something strange that the DX10 HDR rendering path was buggy in the release version of the game, and in the 1.01 patch too.
It´s more logic that the DX10 HDR was correct and the difference with DX10.1 HDR reflects different and buggy render path (Do you remember the lack of one render pass?).
The speedup of performance of 1.01 patch (in 3DRage test) in the game looks like your test results. Then, the lack of DX10.1 support in 1.02 patch doesn´t affect the performance. Yes, in DX10.1 looks like that the AA is better than in other paths, but with this version you have lack of dust effect and different (buggy or not?) HDR rendering. Good reasons for the dropped support, I think.
Consequences of your rumors about sinister dropped support:
http://forums.vr-zone.com/showthread.php?t=283935">http://forums.vr-zone.com/showthread.php?t=283935
Some people believe this version because you defend it in your review, but you didn´t test the veracity of this. The truth is that DX10.1 render path had bugs, and when you made the review, you didn´t know if the dropped support reason was the conspiracy theory or other reason, but YOU chose one by personal election.
That Ubisoft and Nvidia didn´t respond to your email post proved nothing. At most, they were bad-mannered guys with you.