Seagate 7200.9 160GB: The Highest Platter Density to Date!
by Purav Sanghani on January 31, 2006 10:29 PM EST- Posted in
- Storage
Pure Hard Disk Performance - IPEAK
We begin our usual hard disk drive test session with Intel's IPEAK benchmarking utility. We first run a trace capture on Winstone 2004's Business and Multimedia Content Creation benchmark runs to catch all of the IO operations that take place during each test. We then play each capture back using RankDisk, which reports back to us a mean service time, or average time that the drive takes to complete an IO operation.
With two of these 160GB 7200.9 units in a RAID-0 setup, we see that the operations per second increase about 55%. We performed this test as a brief look at how RAID affects performance...and to prove to the skeptics that setting up two or more drives in RAID-0 at least will increase the performance. Here, we see that happening. Let's see if this trend continues.
Let's take a look at Content Creation performance.
IPEAK Write Service Times
We have taken the liberty to also include the average Write Service Times for the 160GB 7200.9. The single 160GB 7200.9 drive has an average write service time of 8.67ms while our RAID-0 setup resulted in about half that at 4.67ms.
We begin our usual hard disk drive test session with Intel's IPEAK benchmarking utility. We first run a trace capture on Winstone 2004's Business and Multimedia Content Creation benchmark runs to catch all of the IO operations that take place during each test. We then play each capture back using RankDisk, which reports back to us a mean service time, or average time that the drive takes to complete an IO operation.
With two of these 160GB 7200.9 units in a RAID-0 setup, we see that the operations per second increase about 55%. We performed this test as a brief look at how RAID affects performance...and to prove to the skeptics that setting up two or more drives in RAID-0 at least will increase the performance. Here, we see that happening. Let's see if this trend continues.
Let's take a look at Content Creation performance.
IPEAK Write Service Times
We have taken the liberty to also include the average Write Service Times for the 160GB 7200.9. The single 160GB 7200.9 drive has an average write service time of 8.67ms while our RAID-0 setup resulted in about half that at 4.67ms.
23 Comments
View All Comments
Orbs - Friday, January 27, 2006 - link
If you have a large, PATA backup drive, then the chance of failure issue really isn't that big a deal, especially with the longer warranties (Raptors are enterprise class products for WD, aren't they?).The interesting question to me is, does performance increase with 10,000 RPMs, SATA bandwidth AND increased platter density.
I believe the Raptors aren't 3.0 GB/s SATA but they still should have plenty of room to run, and if I remember correctly, the 150 GB Raptors gained their extra space by a higher density platter than the 74 GB version.
Now that's a setup that might be worth $600. It all depends if it lives up to the potential. AnandTech, let's get a SATA RAID-0 Shoot Out going!!
Orbs - Friday, January 27, 2006 - link
Oh, and in general, great articles lately :)DS Delaroca - Friday, January 27, 2006 - link
i think he means the new raptors WD1500ADFD 150GB on a raid setup.