ABOUT BENCH FORUMS PODCAST LOGIN REGISTER
PC Components
Smartphones & tablets
Systems
ENTERPRISE & IT
GUIDES

Mid-Tower Mega Roundup

 by Joshua Buss on September 8, 2005 12:05 AM EST
48 Comments | Add A Comment
48 Comments
Lian Li PC-V1000 (cont'd)

The first of the two extra cooling accessories is a large blower fan designed to help draw the rising hot air out of the inverted case.

This piece simply mounts with included screws directly to the perforations in the back of the case, which allows for the fan to be moved to many slightly different positions.

The second addition is simply an attachment for the included rear 120mm fan.

Normally, the fan just pulls air in the surrounding area equally, but after attaching a special piece, a shroud can be added as well.

With the shroud attached, the fan should only pull air directly around the CPU area.

If one wants, the shroud could be locked in a position that keeps it at a good distance from the CPU cooling hardware, allowing for more air from the rest of the case to be pulled out here as well.

However, the shroud can also be lowered very close so that the CPU is pretty much the only hardware benefiting from the additional cooling. We will test the PC-V1000 in this configuration to see how well this approach works.

Overall, the PC-V1000 is a joy to work in - the side panels are second to none, the side-mounting hard drive system works flawlessly, and the inverted design actually makes the case quite easy to work in, as opposed to the P-180's "half inversion", which can be very limited by the length of the power supply leads.

However, cases like the P-180 and Eclipse implement many more sound dampening features, and we'll notice that when we get to the sound benchmarks. In the end, we think the price-premium for a case like the PC-V1000 is a tough sell, considering how much you can get for your money from other manufacturers.

Lian Li PC-V1000 Benchmark Comparisons
PRINT THIS ARTICLE
Comments Locked

48 Comments

View All Comments

  • RupertS - Thursday, September 8, 2005 - link

    The power supply is a good part of the total value of the case. Also, some of the cases may work better (cooling, sound) with the power supply they come with.

    Hard to compare prices like this.

  • johnsonx - Thursday, September 8, 2005 - link

    Ditto that... this complaint has been leveled before of course:

    Anandtech should at least mention what power supply is (or can be) included with the case, and give some sort of subjective rating of same. For example, the Aspire case is most often available with a 420W power supply (usually a mere $15 or so more than the PS-less version), but I've heard it's crap... but maybe it isn't; I'd like Anandtech to tell me.

    Likewise, the Sonata II ALWAYS (AFAIK) includes a SmartPower 2.0 450... doesn't that add significantly to the value equation? (granted, it'd be better if it were a TruePower 380 like the old Sonata, but a SmartPower 2.0 is nothing to scorn)

  • ElFenix - Thursday, September 8, 2005 - link

    everyone should read the reviews on SPCR before setting up a system on this case. the reviews are very thorough and tests it in multiple configurations, and it turns out there are things you can do to improve its thermal performance by quite a bit (such as duct taping over the holes next to the power supply)

  • flatblastard - Thursday, September 8, 2005 - link

    Duct tape on a brand new case? I don't think so..... Well, I personally wouldn't do it, but for modders/OCers I guess it might make sense.

  • fass mut - Thursday, September 8, 2005 - link

    what's the link to the article?

  • ElFenix - Thursday, September 8, 2005 - link

    all three articles, the first is over main features, the second is an absolutely silent computer, and the third is more mainstream rigs

    http://www.silentpcreview.com/article249-page1.htm...">http://www.silentpcreview.com/article249-page1.htm...
    http://www.silentpcreview.com/article254-page1.htm...">http://www.silentpcreview.com/article254-page1.htm...
    http://www.silentpcreview.com/article255-page1.htm...">http://www.silentpcreview.com/article255-page1.htm...

  • jonp - Thursday, September 8, 2005 - link

    Doesn't an ATX extension cable for $4 cover the power supply to motherboard distance concern? Granted, Antec could have included it with the case; but it's NO big deal to resolve. Shouldn't be an issued when deciding.

  • mjz - Thursday, September 8, 2005 - link

    i hate lian li cases. I spent probably 200 dollars on their case (2 years ago) and it vibrates too much, the sound is pissing me off. I guess it can't handle my raptor or something.

  • Tamale - Thursday, September 8, 2005 - link

    I too agree that way too many of these cases are kinda ridiculous looking, but someone said it best when they said "the Eclipse must look better in person"... it really does. I liken it to those fancy cd players from places like brookstone and the sharper image..

    It's flashy, sure, but at least it's kinda 'classy flashy', if you know what I mean. If that kinda look still doesn't please you at all, there's always cases like the P-180 ;)

  • mkruer - Thursday, September 8, 2005 - link

    Considering that I have a PC-V2000 Plus. I am in a unique position to voice my opinion for everyone reading this thread. I will say that yes the cases Lian Li cases are overly expensive, but considering that they are the only “all aluminum” case manufacture, and they have arguably the best design, they can get away with it. The main issues with an “all aluminum” case is that because aluminum is light then steal and yet does not have the absorbing capacity of plastic, aluminum as rule of thumb tends to be louder. However there are three things you can do o improve the noise ratio of the system. First is to install sound absorbing foam in the case. This will cut down on high pitched noise. Next is to install quieter fans. The Lian Li fans are good, but they are only about average in the noise to air ratio. Finally and this is the biggest thing. In order to cut down on the “wan wan” resonance sound coming form the case you need to suspend the drive is a sling and not it the mounting bays. This by far reduces the most noise.
Copyright © 2024. All rights reserved.
BENCH
TOPICS
FOLLOW
ABOUT

Log in

Don't have an account? Sign up now